Rally against rotation with our 18×7 stainless steel rope, available with a 9mm diameter in addition to a range of other sizes. 9mm 18×7 Non-Rotating Stainless Steel Wire Rope is a lightweight, hard wearing solution which will fit lifting tasks where torsion needs to be tackled.
Twists and turns of 9mm 18×7 Non-Rotating Stainless Steel Wire Rope
Like the rest of the non-rotating rope products on our books, this example manages to prevent mid-use twisting through the use of its own intricate structure. Our usual 18×7 stainless steel rope features bundles of wires which run together in the same direction. In this case, the outer array and inner core are locked in opposite directions, creating a sturdy bond that will not revolt in normal usage.
The usage limits of this 9mm diameter rope are defined as being 4,253kg of payload capacity, along with a 41.7kN breaking force rating. Every product we produce will not only be manufactured to the same high levels in terms of quality, but will also be put through its paces before it is shipped to ensure it meets industry standards for safety.
|Nominal Diameter||Approximate Mass||Minimum breaking loads – 1570 Mpa|
With any Rope Services Direct order you can take your pick of extra products to bundle along with the rope itself. In the case of this stainless steel rope, for example, you might want to add ferrules which are also produced using this material.
Rely on our expertise
You can get the support of an RSD specialist by calling 01384 78004 or emailing us with whatever question you have or request you want to make.