Endowed with a non-rotating design, this 8mm diameter rope with an 18×7 construction is fashioned from stainless steel, allowing it to boast corrosion resistance amongst its many other advantageous assets. Read on below to find out more on 8mm 18×7 Non-Rotating Stainless Steel Wire Rope.
Solve your lifting problems
By inverting the direction in which the inner and outer layers of wire strands run, this stainless steel rope manages to resist the forces which might cause standard wire rope to twist and leave awkward loads unstable during manoeuvres.
The diameter of 8mm offered by this rope is modest, but still manages to allow it to tackle loads weighing in at 3,366kg before its safe limits are exceeded. In conjunction with the 33kN breaking force, this capacity gives operators a lot of options.
Bad weather and complete immersion in water will pose not problems for this wire rope, whereas standard steel will suffer from rust quite quickly in similar conditions. Marine use is therefore commonplace, although it is equally suitable for architectural endeavours in outdoor contexts.
|Nominal Diameter||Approximate Mass||Minimum breaking loads – 1570 Mpa|
Choosing extras for 8mm 18×7 Non-Rotating Stainless Steel Wire Rope
Ask us for help
We can provide more information relating to our rope products, as well giving you a quick quote to cover the cost of any order you might want to place, when you call 01384 78004. Emailing our sales team is also straightforward and our responses are typically swift.