18×7 Non-Rotating Stainless Steel Wire Rope

Please have a read the below information, which contains everything that you need to know regarding our 18×7 non-rotating stainless steel wire rope construction.

Product information

This particular product has been constructed from 18 bundles of 7 strands of strong stainless steel wire, which results in the sturdy product that we are able to offer to our customers. 12 of these bundles will be laid on the outside of the product, while the remaining 6 will be laid inside.

This is the same construction as our standard 18×7 non-rotating stainless steel wire rope product, with the difference being that the outer and inner layers run in opposite directions, helping to create the rotation resistant effect that our clients desire.

The fact that it is constructed from stainless steel also means that it has a great deal of strength and robustness, as well as a long service life. You will also find that it has a great level of resistance to abrasion, corrosion and rust too.

We use our state-of-the-art on site facilities in order to create this equipment, and will thoroughly test and inspect all 18×7 equipment before passing it on to our customers.

Find out more about our 18×7 non-rotating Stainless Steel Wire Rope

If you are interested in hearing more about how this wire rope is constructed or simply want to go right ahead and order, then you can do so by calling us on 01384 78004. Or, you can find all of our contact details here.

Nominal Diameter Approximate Mass Minimum breaking loads – 1570 Mpa
[mm] [kg/m] [kN] [Kg]
6 0.144 18.5 1,887
8 0.256 33 3,366
9 0.324 41.7 4,253
10 0.4 51.5 5,253
11 0.502 62.3 6,354
12 0.576 74.2 7,568
13 0.676 87.1 8,884
14 0.796 101 10,302
16 1.04 132 13,464